Force FORCEOL Series, Installation, Operating And Service Instructions, Page: 8 / 72

8
5. For minimum clearances to combustible materials.
See Figures 2A and 2B.
NOTICE
Clearance to venting is for single wall vent
pipe. If Type L vent is used, clearance may be
reduced to the minimum required by the vent pipe
manufacturer.
C. PROVIDE COMBUSTION AND VENTILATION
AIR.
Local and National Codes may apply and should
be referenced.
Boiler
Model No.
Beckett NX
Oil Burner
Part No.
Direct Vent
Conversion Kit
Part No.
FOVP Carton Part No.
FORCEOL147 106109-03
106401-01
100211-02 - 5 ft.
100212-02 - 10 ft.
FORCEOL189 103369-01
100213-02 - 15 ft.
100214-02 - 20 ft.
TABLE 2: DIRECT VENT CONFIGURATION
COMPONENTS
II: Pre-Installation
(continued)
Figure 2B: Direct Vent - Minimum Installation Clearances To Combustible Materials (Inches)
NOTES
: 1. Listed clearances comply with American National Standard
ANSI/NFPA 31, Standard for the Installation of Oil Burning
Equipment .
2. FORCEOL boilers can be installed in rooms with clearances
from combustible material as listed above. Listed clearances
cannot be reduced for alcove or closet installations.
3. For reduced clearances to combustible material, protection
must be provided as described in the above ANSI/NFPA 31
standard.
WARNING
Adequate combustion and ventilation air must
be provided to assure proper combustion and
to maintain safe ambient air temperatures.
Do not install boiler where gasoline or other
flammable vapors or liquids, or sources of
hydrocarbons (i.e. bleaches, fabric softeners,
etc.) are used or stored.
D. DIRECT VENT CONFIGURATIONS requires:
1. Beckett NX Burner
2. Direct Vent conversion Kit
3. Double Wall Flex Oil Vent Pipe (FOVP)
3"
3"
24"
6"
3" 3"
6" 6"
6"
VENT
PIPING
AIR INTAKE
PIPING
(REMOVED
FOR CLARITY)
FDVS
DIRECT
VENT
AIR
INTAKE
PIPING
AIR
INTAKE
PIPING
3"