Force Computers SPARC CPU-54, Reference Manual

Page: 61 / 138

Board Installation Installation
2 - 20 SPARC/CPU-54
Solaris 8
When setting up Solaris interactively, these packages can be installed by
selecting/deselecting the proper software group in the software dialog
window. If applicable, customize the software group as shown in the
following table.
Note: During installation, make sure that the 64-bit support is en-
abled.
If a PS/2 keyboard and mouse is used, the package shown in the table
below is available.
Note: During the boot process, the following warning may appear:
WARNING: i2c_client_register_failed
. If this should be the
case, the warning can be ignored as it has no impact on the boot pro-
cess.
Table 10: Customizing Solaris 8
Software Group Customizing
Entire distribution plus OEM support No customizing required
Entire distribution No customizing required
If a PS/2 keyboard/mouse is used, proceed
as follows:
Under “drivers for SME support (64 Bit)”,
select “PS/2 keyboard and mouse device
drivers (Root, 64 Bit).
Developer system support
End user system support
Core system support
Table 11: Required Solaris Package for Solaris 8
Package Description
SUNWCsmex for 64-bit Drivers for SME systems (64-bit)