Part 1: Station Setup
3. When visitors step up to the ATMS, they
need to follow the on-screen instructions and
stay 1.97” to 2.75” (5 to 7 cm) away from the
thermometer sensor, stand still, and wait for 1
second. The measurement is completed after
the beep.
Helpful Information
• The ATMS measurement is designed to be used
indoors. Avoid direct sunlight and windy areas
as dust will cause inaccurate results.
• If the user has just come from either a freezing
or a hot environment, a break is advised before
measuring your body temperature.
This portion of the guide will walk through setting
up the automatic temperature measuring station. For
step by step instruction on setting up the stand itself,
please refer to the user guide.
Measuring Station
1. Place the ATMS stand in a proper location and
lock the latches of the wheel. The senor head
should be angled directly toward the forehead
and vertical to the ground. Be careful not to
touch the buttons of the thermometer.
2. Please adjust the thermometer to a proper
height to suit the needs of your facility. Once
the height of the ATMS is set, DO NOT adjust
the conduit and spring clamp again. The
recommended height is 5 feet (around 150
cm).
