for_q 4306517270995, Manual

Page: 137 / 144

EN
137
Plug the supply cord to a suit-
able wall outlet.
Set cutting depth
With the grinding wheel still
lowered, set the required cut-
ting depth on the cutting depth
screw
12
and lock it with the
counter nut.
Lock chain
If the proper distance is set on
the chain stopper screw
5
lock
it with the counter nut.
Tighten the chain lock lever
8
to
lock the chain in place.
Raise chain stopper
Raise the chain stopper
6
of the
machine vise
7
.
Set top plate angle / B
Loosen the vise lock knob
10
and set the desired top plate
angle at the vise angle scale
9
.
Tighten the vise lock knob
10
.
Lower grinding wheel
Carefully lower the grinding
wheel
15
behind a right cutter.
Use the chain stopper screw
5
to set the required distance
between cutter and grinding
wheel
15
.
Lower chain stopper
Lower the chain stopper
6
and
pull the saw chain to the right
until a right cutter is centric on
the vise
7
. Pull the saw chain to
the left until the cutter engages
at the chain stopper
6
.
Install the handle to the ma-
chine head
2
.
Set cutting angle / A
Loosen the cutting angle lock
knob
13
and set the desired cut-
ting angle at the cutting angle
scale
14
. Tighten the cutting an-
gle lock knob
13
.
Insert chain
Insert the saw chain into the
chain bar
18
. The rotation direc-
tion is from left to right.
S5
S7
3
S1 S2
S4 S3
S6
S8
Caution!
Make sure the appli-
ance is switched off and un-
plugged.
Caution!
The saw chain is
sharp, make sure to wear
protective gloves.
4