19
Operating Instructions
Other features
Operation Instructions
COOL operation
· Press the "MODE" button until the "COOL" indicator
light comes on.
· Press the ADJUST buttons "+" or "-" to select your
desired room temperature. The temperature can be
set within a range of 17 to 30°C/62 to 88°F (or 86°F).
· Press the "FAN SPEED" button to choose the
fan speed.
DRY operation
· Press the "MODE" button until the "DRY" indicator
light comes on.
· The fan speed or the temperature cannot be
adjusted. The fan motor operates at LOW speed.
NOTE: Keep windows and doors closed for the best
window.
FAN operation
· Press the "MODE" button until the "FAN " indicator
light comes on.
· Press the "FAN SPEED" button on the remote
controller to choose the fan speed. The temperature
can not be adjusted.
· Do not put the duct into the window.
SLEEP/ECO operation
This feature can be activated from the remote control
ONLY. To activate SLEEP feature, the set temperature
will increase (cooling) or decrease (heating) by 1°C/2°F
(or 1°F) for 30 minutes. The set temperature will then
increase (cooling) or decrease (heating) by another 1°C
/2°F (or 1°F) for an additional 30 minutes. This new
temperature will be maintained for 7 hours before it
returns to the originally selected temperature. This
ends the SLEEP mode and the unit will continue to
operate as originally programmed.
NOTE: This feature is unavailabe under FAN or DRY
mode.
Constant Fan button
In COOL or DRY mode, press the button for
function. When the function is turned on, the
constant fan light will illuminate, indicating
the fan will continuously run for cooling.
fan light will go out.
CONSTANT FAN (Press 3 s)
VENT. CONSTANT (appuyer 3 s)
