FOR-A VFC-1000, Operation Manual

Page: 31 / 76

19
B) If there are no problems with the connected cables or network devices, and the following
message appears after pinging
Reply from 192.168.2.1xx: Destination host unreachable.
Type “ipconfig /all” in the command prompt window (the window where the Ping
command was entered), then press Enter key.
Check the underlined areas shown below.
Ethernet adaptor: (Varies depending on type of PC used.)
Description: (Varies depending on type of PC used.)
Physical Address: (Varies depending on type of PC used.)
DHCP Enabled: No
IP Address: 192.168.2.yyy
(This should be the IP address set for PC.)
Subnet Mask: 255.255.255.0 (This should be the subnet mask set for PC.)
Default Gateway: . . . . . (This should be blank.)
DHCP Server: . . . . . (This should be blank.)
Primary WINS Server: . . . . . (This should be blank.)
Lease Obtained:
Lease Expires:
If the information on the screen does not appear as shown above, go back to the procedure
shown under 4-1-2. “Setting PC’s IP address” and reenter the settings.
If there are no problems with the above settings, then there is a problem with the
network environment. Contact your PC or network administrator.