13
Video Clamp
Video clamp setting
(Refer to Clamp in Sec. 4.
“Front Module DIP Switch Settings.”)
Video Coupling
Video coupling setting
(Refer to Coupling in Sec. 4.
“Front Module DIP Switch Settings.”)
Video Gain
Video gain setting (set on the front panel)
Compensation Mode
Compensation mode of USF-1040VEA or 1100VEA.
(
Refer to SD/HD in Sec. 4.”Front Module DIP Switch Settings.”)
Cable Compensation
Cable compensation level setting (set on the front panel)
Item
Setting
Video Gain
Setting is enabled when SW 4 is set as REMOTE.
Set the input signal gain.
Default:
0dB
Settable Range:
-3.5dB to 3.5dB
Cable Compensation
Setting is enabled when SW 3 is set as REMOTE.
Set the input cable compensation level.
Default:
0m
Settable Range: [
0m
] to
[200m - 300m]
(Refer to (5) COMPEN (COMPENSATION) in Sec.2-1
”Front
Panel.”)
Downloading MIB Files
(1) Click
to download SNMP Manager MIB (Management Information Base)
(2) Select
Save (S)
from the opened dialog box.
(3) The FORA-USFVEA-MIB.zip file is downloaded.
(4) Unzip the file and load it from SNMP Manager.
