FOR-A MV-1600, Operation Manual

Page: 22 / 88

14
4-7. Auto Sequencing Mode
The displayed channel in full screen display or page in split screen display can be changed
automatically.
NOTE
The display interval can be set in the menu. See section 5-2-1. "Auto Sequencing
Interval Settings" for details.
4-7-1. Full Screen Auto Sequencing
1. Press VIDEO SELECT 1 to 16 button to display a full screen.
2. Press AUTO button. The button lights up and it starts to switch channels automatically and
sequentially.
3.Press VIDEO SELECT 1 to 16 button or any one of the SPLIT button to stop auto sequencing.
IMPORTANT
Channels without video signals and channels for which the auto sequencing intervals
are set to '0' are automatically skipped.
There may be a distortion (1frame:1/60sec.) when switching channels.
4-7-2. Quad and 9-split Screen Auto Sequencing
1. Press the desired SPLIT button to display the split screen for auto sequencing.
2. Press the AUTO button. The button lights up and it starts to switch split pages automatically
and sequentially.
IMPORTANT
Channels that meet any of the following conditions are automatically skipped.
Channels with no video signal
Channels for which the auto sequencing intervals are set to '0'. (See each
channel settings in section 5-2-1. "Auto Sequencing Interval Settings".)
The auto sequencing interval can be set at SPLIT in AUTO SEQUENCING menu as
described in section 5-2-1. "Auto Sequencing Interval Settings".
There may be a distortion (1frame:1/60sec.) when switching split pages.
In the example of the split screen auto sequencing below, the page D is not displayed:
e.g. Split configuration: quad
CH13, CH14 : No signal
CH15, CH16 Auto sequencing interval is set to '0' for each channel
(IMPORTANT
If auto sequencing is set for 9-split screen display, the display on VIDEO output and
the video transmission over a LAN interface are in 16-split screen mode.