13
3-2. How to Install a New Card
The following procedure shows how to install an output card into OUTPUT1 slot.
(1) Unfasten four fixing screws on the front panel and
detach the front panel.
(2) Remove the two screws on both sides of
the card stopper and detach the stopper.
(3) Detach the OUTPUT1 slot blank panel.
(4) Insert a new card into the OUTPUT1 slot and
push it in until the hole becomes entirely
visible.
*
Confirm the slot number (See the figure
on page 5) and direction before card
insertion.
(5) Re-install the card stopper removed in Step (2).
MFR
POW ER 2
ON
OFF
POW ER 1
ON
OFF
MFR-6100
ROUTING SW ITCHER
POW ER
CPU2
CPU1
(2)
Card stopper
(3)
(2)
OUTPUT1 slot
Slot 1-16
Place the connector downward.
Slot 17-32
Place the
connector upward.