15
4. Setup (Network Settings)
Network settings should be changed for multiple AUX units connected to a switcher, since identical IP
addresses within a network are not allowed.
4-1. SETUP Menu
The
SETUP
button allows you to enter
Setup Menu
mode, in which AUX Unit network settings can
be displayed and changed. The left four buttons (The three buttons for HVS-AUX16C/16D) are
used to select information to be displayed. To exit Setup Menu mode, press the
SETUP
button
again.
HVS-AUX16A/16B/32A/64A
Button name
Default setting
Description
AUX IP
192.168.0.20
Sets the AUX Unit IP address.
NETMASK
255.255.255.0
Sets the AUX Unit Netmask.
AUX IP + NETMASK
192.168.0.1
Sets the AUX Unit default Gateway.
SW IP
192.168.0.10
Specifies the IP address of the switcher to be
connected.
AUX ID
1
Sets the AUX Unit ID number.
HVS-AUX16C/16D
Indicator display
Default setting
Description
AUX SET1
IP
192.168.0.20
Sets the AUX Unit IP address.
MASK
255.255.255.0
Sets the AUX Unit Netmask.
AUX SET2
GW
192.168.0.1
Sets the AUX Unit default Gateway.
ID
1
Sets the AUX Unit ID number.
FMT
FIX
Sets the AUX Unit LCD display. (See. Sec. 6-2. for
details.)
TARGET SET
IP
192.168.0.10
Specifies the IP address of the connecting
switcher.
4-2. Connecting a Single AUX Unit to a Switcher
No network settings are required. Connect and use your AUX Unit under the factory default
settings.
DC12V IN
LAN
HVS-AUX16A rear panel
REF OUT
1
1
2
3
4
5
6
7
8
2
3
4
A
B
C
REF IN
1
2
2
AC100-240V 50/60Hz IN
AC100-240V 50/60Hz IN
1
TO OU
LAN
GENLOCK
SDI INPUT
RS-422
GPI IN/TALLY OUT
HDMI OUT
AUX
HVS-100 rear panel
192.168.0.10
192.168.0.20
AUX ID: 1
Cross-over cable
