4
5. Press the blue button in front of the HVS-49SSD240G to open the handle as shown in the below
figure.
6. Slide the HVS-49SSD240G into the shield panel slot as shown.
7. Push to close the HVS-49SSD240G cover handle. Doing so secures the HVS-49SSD240G into
the slot.
8. Attach and fasten the supplied panel with the two screws. Make sure the panel is facing the
correct direction and covers the HVS-49SSD240G slot entirely.
9. Return the board from Step 2 above to the HVS-490 rear panel by sliding guide rails onto the
back, then fastening the screws onto both ends.