Foppapedretti MEETING, Instruction Manual

Page: 15 / 64

15
• ENGLISH • • ENGLISH •
ADJUSTING THE BACKREST (4)
The high chair backrest can be reclined in 3 positions.
To adjust the backrest, press the button located at the top on the back, lift up or recline the
backrest to the desired position and release the lever. The backrest will lock in one of the three
positions, in the rear part of the armrests and you will hear a click when it is engaged (Fig. 4).
This process can also be carried out with the child in the high chair.
ADJUSTING THE LEG REST (5)
The leg rest can be adjusted to 2 positions.
Press the two side adjustment buttons at the same time and raise
or lower the leg rest.
Release the buttons and check that the leg rest has locked correctly
in the desired position.
ADJUSTING THE FOOTREST (5a)
The high chair is equipped with a footrest which can be positioned
at 3 different heights.
From the position of use, rotate the footrest upwards to remove it
from the seat (Fig. 5a).
Remove and reinsert the footrest at the desired height.
Rotate the footrest downwards to lock it in the new position. Before use, check that it is locked correctly.
ADJUSTING THE HEIGHT OF THE HIGH CHAIR SEAT (6)
The HIGH CHAIR can be positioned at 6 different heights.
•
To lift up the seat:
Hold the backrest at the top and pull it upwards until you
reach the desired height.
•
To lower the seat:
Simultaneously press the buttons on each height adjustment
hinge and lower the seat to the desired position. Release the buttons.
Make sure that the seat is correctly locked in the new position and that the
number indicating the adjustment position is the same on both sides.
CAUTION
: Make sure you adjust the seat without the child placed in the HIGH
CHAIR.
ASSEMBLING THE TRAY (7)
Hold down the lever on the underneath of the tray (7) and place the
tray on the seat, checking that the armrests are inside the guides
located on the bottom of the tray itself.
Release the lever and push the tray towards the inside of the HIGH
CHAIR, until it locks in place. A click will indicate that it has locked
in position correctly.
CAUTION
: Always check before use that the tray is attached and
locked correctly on the armrests.
CAUTION
: Never leave the tray in a position where the danger
symbol is visible on the armrests: this is NOT safe!
IMPORTANT
: Check before use that the tray is correctly locked in the chosen position by pulling it outwards without pressing
the lever; the tray should stay in place.
ASSEMBLY