background image

Tips

General Tips

Tips for Successful Vacuum Packaging

(continued)

1.

Vacuum packaging is NOT a substitute for the
heat process of canning. Perishables still need to
be refrigerated or frozen.

2.

For best results, use FoodSaver

®

Bags, Canisters

and Accessories.

3.

During the vacuum packaging process, small
amounts of liquids, crumbs or food particles can
be inadvertently pulled into Vacuum Channel

(J)

,

clogging the pump and damaging your appliance.
To prevent this, follow these tips:

a.

For moist and juicy foods such as raw meats:
Freeze first and avoid over filling bags.You can
also place a folded paper towel inside top of bag,
but below seal area, before vacuum packaging.

b.

For soups, sauces and liquids: Freeze first and
avoid over filling bags. Or, use a canister in
refrigerator.

c.

For powdery or fine-grained foods: Avoid 
over filling bags or use a canister.You can also
place a coffee filter or paper towel inside
before vacuum packaging.

d.

If your appliance features a Drip Tray

(I),

empty 

after each use.

4.

To avoid over filling, always leave at least 3 inches
of bag material between bag contents and top of
bag.Then leave at least one additional inch of bag
material for each time you plan to reuse bag.

5.

Do not create your own side seams for a
FoodSaver

®

Bag.These bags are manufactured 

with a special side seam, which is sealed all the
way to the outer edge.

6.

To prevent wrinkles in a seal when vacuum 
packaging bulky items, gently stretch bag flat 
along Sealing Strip

(L)

before you close lid.

7.

If you are unsure your bag was sealed properly,
simply reseal bag about 

1

4

inch above first seal.

8.

When you are vacuum packaging items with
sharp edges (dry spaghetti, silverware, etc.),
protect bag from punctures by wrapping item in
soft cushioning material, such as a paper towel.
You may want to use a canister or Mason jar
instead of a bag.

9.

When using accessories, remember to leave one
inch of space at top of canister or container, and
make sure to lock Latch 

(E)

before vacuuming.

Unlock the Latch when finished.

10.

Pre-freeze fruits and blanch vegetables before 
vacuum packaging for best results. See pages 
2-3 of FoodSaver

®

Reference Guide for more 

information.

11.

If appliance does not function, check to make
sure the Latch

(E)

is in the locked position.

12.

If storing appliance horizontally, make sure 
the Latch 

(E)

is in the unlocked position. If 

storing appliance vertically, lock the Latch
halfway, to the store position. Make sure 
Drip Tray 

(I)

has been emptied before 

storing vertically.

©

2008 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved.

Printed in China.

Item # T000-03520-033  (03/08)  V2830

Item # T000-03510-033  (03/08)  V2820

 

 

 

    

 

                      

 

       

 

                     

 

 

Summary of Contents for V2820













Reviews: