PowerPack storage
Storing the PowerPack for extended periods (i.e.; longer than two months)
can result in some loss of capacity.
Storing the PowerPack in ideal conditions will obtain optimum safety and minimise
the effect of capacity loss:
1. Store the PowerPack in a cool, dry place ~15°C.
2. Charge the PowerPack to 80% before storage.
3. Periodically check PowerPack charge level and charge back to 80% (every few
months).
Warning!
Storing Lithium Ion cells at 0% SOC for extended periods
of time will result in destruction of the PowerPack due to internal shorting.
Operating temperature
0 to 45°C
Warning!
If air temperature is 38˚C or above and/or high humidity,
allow the system to rest for up to three hours prior to charging.
Long-term storage
If the PowerPack is kept stored for a long time (3 months or more), it is strongly
recommended that the cell is preserved at dry and low-temperature.
If you do not ride for an extended time (i.e. such as during winter) we recommend to
repeat the PowerPack running in procedure for 2-3 cycles (see page 4 of manual)
Warning!
the pack must not be stored below 60%.
Optimal storage is 60-80% SOC
Any problems caused by malfunction of the PowerPack due to unsuitable use and
care of PowerPack Cells are not covered under warranty. The handling conditions
described above must be followed or the warranty will be voided.
z
Electronics
31
STORAGE:
store PowerPack at 80%
WEATHER:
During extremely hot
temperature, after riding, allow 1
to 2 hours before recharging your
PowerPack. In these conditions its
best to remove the PowerPack
from your Fonzarelli during
charging.
CHARGE INTERVALS:
while the
battery cells in your PowerPack
will not be affected due store
charge memory however from
time to time you should discharge
your PowerPack to calibrate with
your
