z
Riding
Pre-Ride inspection
A pre-ride inspection will only take a few minutes, and should be conducted
every day before you ride your Fonzarelli.
1. PowerPack – ensure the PowerPack is correctly fitted, and cables correctly attached.
Check charge level is sufficient for distance of travel.
2. Brakes – check for correct operation; make sure there is no fluid leakage.
3. Tyres – check condition and pressure.
4. Lights and Indicators – check for correct operation.
5. Throttle – check for correct and smooth operation.
Resolve any problems before you ride. Contact an authorised Fonzarelli representative
if you cannot correct the problem.
Warning!
If the pre-ride inspection is not conducted before using the Fonzarelli,
damage to equipment or severe injury could result.
Starting procedure
1. Insert the key and turn clockwise to the ON position.
2. Mount the scooter, and move side-stand to stowed position.
3. Ensure the kill-switch is in the RUN position.
4. Ensure the kick stand is UP and all warning lights are extinguished
5. Your scooter is now ready to ride.
22
