User Manual
Thank you for purchasing this Fontastic
®
Headphone
„Tela“
.
Please read the Manual carefully and observe the safety
instructions. Please keep these operating instructions for future
reference.
Package contents
• Fontastic
®
Headphone Tela
• USB charging cable
• 3.5 mm audio cable
• This user manual
Overview
1.
Speaker
2.
Height adjustment
3.
Headphone strap
4.
button | Next title
5.
Multifunction button
(On/Off, Telephone,
Music Start/Stop)
6.
Volume- button | Previous title
7.
3.5 mm Line-in connector
8.
Microphone
9.
Micro USB connector
10.
LED indicator
11.
On/Off switch
LED functions
Connected
Blue flashes
Not connected
Blue and red flashing alternately
Incoming call
Blue flashing slowly
Battery charging
Red steady on
Pairing mode
Blue and red flashing alternately
Charging the battery
The Fontastic
®
Tela is equipped with an internal rechargeable
battery. Connect the Tela with the micro USB cable which is
included in the package contents.
The cable can be connected to a computer or a standard USB
power supply. The red LED of the Tela lights up during
charging and changes to blue when fully charged.
The cable can be disconnected from the Fontastic
®
Tela.
GB
GB
1
2
Note:
Charge Tela for at least 2 hours before initial use.
Adjusting the height / turning the speakers
Tela offers the possibility to adjust the loudspeakers in height to
the optimum position for you. To do this, hold the loudspeaker
unit up and pull the headphone strap (3) upwards. Adjust the
headphones in this way until the ear pads are exactly on the ear.
For comfortable wearing around the neck when the headpho
-
nes are not being used to listen to music, the speakers can be
turned outwards. The headphone can be folded for space-saving
storage or transport.
Switching On /Off
To switch on,
slide the On/Off switch (11) to the On position.
The voice announcement sounds and the red/blue LED flashes.
To switch off,
push the On/Off switch (11) to the Off position.
The voice prompt sounds and the LED will be turned off.
Pairing
Tela must be paired with a Bluetooth
®
device before it can be
used as wireless headphone with hands free function.
1.
Switch on the headphones as previously described.
The red-blue LED flashes quickly, this signals the pairing
mode.
2.
Search for
„Tela“
on your Bluetooth
®
enabled device and
select it from the list of found devices to connect the
headphones to the Bluetooth
®
device.
3.
Confirm the connection with
Tela
.
If you are unsure about the pairing procedure of your Bluetooth
®
device, please check your device manual. When using a
Bluetooth
®
transmitter without display, set it to pairing mode and
wait a few seconds until the connection with Tela is established.
Note:
If the connection is lost or the transmitter is disconnected
temporarily, turn the headphones off and on again to restore the
connection.
Music playback
Start music playback on the Bluetooth
®
source which is paired
with the Tela. The music is transferred to the Tela.
1
2
3
4 5 6
7
8 9 10 11