1. DESCRIPTION
- Message programmer, alarms, background music player and SIP client with 4 output zones.
- 4 independently configurable zones (aux input, background music, scheduled messages, instant
messages, alarms and SIP call).
- 16 GB internal memory for audio files. Compatible formats: MP3, WMA, WAY and OGG.
- USB storage device and SD memory card for updating the device and audio file storage.
- Remote control using
ZSM-GO
: status control, scheduling and audio file transfer.
- Autonomous operating without the need to be connected to the
ZSM-GO
program.
2. BASIC STEPS RECOMMENDED FOR INSTALLATION/CONFIGURATION OF
ZSM DEVICES
1.- Make sure the device is connected to the local network.
In the
ZSM-1050
device itself, enter the Configuration menu -> Network -> Status.
If it appears as “disconnected”, check the configuration of your network, the connection of the device,
the Ethernet cable, etc. If necessary, set up a fixed IP address in the Set up menu -> Network -> Edit.
To connect to a ZSM device via internet, the TCP communications port and the UDP transfer port must
be redirected.
The easiest way to accomplish this is by assigning a fixed IP address to the device and then, redirecting
the two ports in the router to this fixed IP address.
2.- Use the
ZSM-GO
program to create a new connection and so be able to connect with the device (see
New Connections section).
3.- Use the
ZSM-GO
program to configure the device (see Configuration section). The following parameters
can be configured: General, Inputs/Outputs (I/O), Audio and Communications.
4.- Transfer the audio files from the
ZSM-GO
program to the device.
5.- Using the
ZSM-GO
program set up background music, scheduled messages, direct messages and
alarms (see corresponding sections).
- 5 -
EN
ZSM-1050_MANUAL_(EN)_20190425.qxp_Maquetación 1 25/4/19 9:33 Página 5
