1. DESCRIPTION
- Message programmer, background music player, and SIP client with one output zone.
- 16 GB internal memory for audio files. Compatible formats: MP3, WMA, WAV and OGG.
- USB storage device for updating the device.
- Remote control using
ZSM-GO
: status control, scheduling and audio file transfer.
- Autonomous operating without the need to be connected to the
ZSM-GO
program.
2. BASIC STEPS RECOMMENDED FOR INSTALLATION/ CONFIGURATION OF
ZSM DEVICES
1.- Make sure the device is connected to the local network.
2.- In the
ZSM-1000
, device itself, Press the 1 button for 3 seconds to open the Network menu and select
Status.
3.- If it appears as “disconnected”, check the configuration of your network, the connection of the device,the
Ethernet cable, etc. If necessary, set up a fixed IP address in the menu -> Network -> Edit -> fixed IP.
To connect to a ZSM device via internet, the TCP communications port and the UDP transfer port must
be redirected.
The easiest way to accomplish this is by assigning a fixed IP address to the device and then redirecting
the two ports on the router to this fixed IP address.
4.- Use the
ZSM-GO
program to create a new connection so that you can connect to the device (see New
Connections section).
5.- Use the
ZSM-GO
program to configure the device (see Configuration section). The following parameters
can be configured: General, Audio, Communications, and SIP.
6.- Transfer the audio files from the
ZSM-GO
program to the device.
7.- Using the
ZSM-GO
program, set up background music, scheduled messages, direct messages and SIP
client (see corresponding sections).
- 5 -
EN
ZSM-1000_MANUAL_(EN)_20190426.qxp_Maquetación 1 27/6/19 15:33 Página 5
