FONESTAR TMRI-844, Instruction Manual

Page: 5 / 16

MSHT-40M Wireless hand-held microphone transmitter
1.- Grille : protects the microphone capsule and helps to reduce noises from breathing or the wind blowing.
2.- Display : displays information on the tuned frequency, channel number, battery level, RF signal level
and audio signal level. If the battery level is low, the screen will light up red.
3.- Battery compartment : unscrew this cover to access the battery compartment.
4.- GAIN : adjust the sensibility of the audio input.
5.-
q
: hand-held microphone on/off switch.
6.- Battery compartment : use two 1.5 V LR6-AA type batteries, alkaline or rechargeable. When inserting
the batteries, make sure that the polarity is correct.
7.- SET : allows selection among the following configuration options: channel number and frequency, RF
transmission level (high/low), battery type selection (1.2 V - rechargeable/1.5 V - alkaline) to display the
battery level correctly and lock the microphone transmitter. In order to do so, press the SET button
repeatedly and use the
w / s buttons to select the options.
8.-
w
/
s
: allow selection of the menu options to configure the hand-held wireless microphone.
9.- Contacts to recharge the wireless microphone’s rechargeable batteries in the recharge docking station
mod.
MSC-2 .
Note : when the SET button is pressed to configure the different microphone parameters, a MUTE indicator
appears in the display and the microphone does not transmit audio while the parameters are being
configured.
- 5 -
EN
TMRI-844_TPRI-845, TSRI-841_MANUAL_(EN)_20180315_Maquetación 1 15/3/18 12:31 Página 5