EN
- 6 -
MULTI-EFFECTS PROCESSOR
21.-
FUNCTION
: display which shows the number of the chosen
effect.
22.-
PROGRAM (PUSH)
: button which allows you to select the
desired effect for the input signals. Turn the control until the
number of the desired effect appears in the display and then
press the control to select it.
23.-
DSP MUTE
: push button which allows you to activate or
deactivate the chosen effects.
24.-
CLIP/MUTE
: LED signal saturation and MUTE mode
indicator to silence the audio. The MUTE LED indicator lights up
while the audio has been silenced and turns off when the MUTE
is deactivated.
25.-
AUX/DFX RET
: auxiliary and FX bus volume control.
26.-
FX send
: FX bus output connector, 6.3 mm mono jack. Can
be connected to an FX processor. This output level is adjusted
with the AUX/DFX RET control.
27.-
FX RETURN
: input connector allowing an FX processor
return stereo signal connection or an auxiliary input signal, stereo
6.3 mm jack.
28.-
FOOTSWITCH
: connector for a pedal switch allowing you
to select the effects.
USB/MP3 PLAYER
29.- Information display.
30.-
PLAY/PAUSE
: starts or pauses playback.
31.-
USB
: USB port for the connection of memories and USB hard discs with FAT32 file system. If the
storage device has MP3 files, these can be played back.
32.-
DOWN/REV and UP/CUE
: with playback paused choose the song or file to be played. In pause or
playback mode, with a short press, choose the previous or the next track. With one long press fast
forward or rewind from that point in the song or file.
33.-
REPEAT
: in playback mode this button lets you select the repetition mode from: REPEAT ALL, REPEAT
ONE song, repetition deactivated and RANDOM repetition (an A appears on the screen).
34.-
POWER
: one long press of this button switches the USB player on or off.
35.-
STOP
: in play mode, one press of this button stops playback and shows the number of MP3 songs
included in the USB device.
