y de nivel de línea.
10.-
BAL
: balance adjustment of the input signals for channels 7-12.
11.-
LINE IN and MIC/LEFT IN
: 6.3 mm stereo and combo jack mic.
and line signal input connectors. With the 6.3 mm stereo jack
connectors (LINE IN and LEFT IN), balanced stereo line level signals
can be introduced.
On the other hand, if you only use the left channel connector, the
input signal will be shared between the 2 channels.
In order to introduce microphone level inputs, use the XLR
connector.
12.-
12 V LAMP
: BNC connector which supplies 12V for the power
supply of a lamp. Press the on/off switch to turn the lamp on and
off.
13.-
+48 V PHANTOM
: +48 V phantom power supply selector with LED
indicator for condenser microphones. The phantom power supply
is present in the XLR microphone connectors of channels 1-12.
14.-
AMPLIFIER ASSIGN:
allows you to route the output signal to the
amplifier for different operating modes, L/R, L+R/monitor and
bridge mode. Please read the CONNECTION section for more
information.
15.-
FX to Main
: allows you to control the level of the signal with effects
that is sent to the MAIN output signal.
16.-
FX to Mon
: allows you to control the level of the signal with effects
which is sent to the MONITOR output signal.
17.-
BAL
: TAPE IN input signal balance adjustment.
18.-
LEVEL
: TAPE IN input signal volume control.
19.-
TAPE IN
: input connectors for an auxiliary signal coming from an
external reproduction device. It allows you to connect the signal
with a 3.5 mm stereo jack connector or 2 RCA connectors.
20.-
TAPE OUT
: MAIN signal output RCA connectors so that it can be
introduced in a recording device.
STEREO input channels CH-7/CH-12
: stereo input channels for microphone and line level signals.
EN
- 5 -
