EN
- 9 -
INTEGRATION WITH OTHER SYSTEMS
This equipment is designed for integration with video systems. To communicate between the two devices, it
is necessary to connect them with an Ethernet data cable via the DATA port RJ-485, RJ45 connector.
When the SCI-750 assings a channel to a microphone, the equipment sends the microphone ID to the video
processor so that it can position the camera towards this microphone (auto-tracking). For the auto tracking
function to be carried out correctly, the positions of each microphone must be previously configured by
identifying them by their ID and the ID of the chairman must be 1.
SCI-750
WIRELESS CONFERENCE SYSTEM
SCI-750
ANT B
ANT B
ANT A
DATA
ANT DATA
UNBAL
BAL
OUTPUT
FREQUENCY
DATA
B
A
FREQUENCY
FREQUENCY
12-15 V DC,1-2 A
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RS-232
VIDEO CONTROL SYSTEM
Cameras
INSTRUCTIONS FOR THE USE OF MICROPHONES WITH BATTERIES
These microphones can be powered by a rechargeable 3.7V 1,950 mAh battery, or by 3 1.5V LR6-AA
batteries. The device includes the necessary connections for the use of rechargeable batteries. Should
you prefer to use batteries, one of the connections located inside the battery compartment will need to be
replaced.
The following image shows the connection that needs to be removed. When removing the connection, press
the protruding inserts that hold the piece in place with extreme care.
AA 1.5V
+
AA 1.5V
+
AA 1.5V
+
+
+
+
AA 1.5V
+
AA 1.5V
+
AA 1.5V
+
IRC 14430X3
3.7V 1950mAh
+
Finally, insert the provided connection in the correct position as shown in the following image.
AA 1.5V
+
AA 1.5V
+
AA 1.5V
+
+
+
+
AA 1.5V
+
AA 1.5V
+
AA 1.5V
+
IRC 14430X3
3.7V 1950mAh
+
