INSTANT RECORDING
While viewing, press the RECORD button to immediately start recording the current channel.
If the RECORD button is pressed again, the length of the recording can be chosen.
Press the STOP button to stop recording and the confirmation will appear on the screen: press YES to stop
recording and NO to continue recording.
When there is no more space in the USB storage device, the recording process will finish.
TROUBLE SHOOTING
In some areas, the digital TV signal can be weak. To watch the channels with the weakest signal, you must
provide the receiver with a suitable level signal. Re-position the antenna and check the status of the amplifier.
PROBLEM
POSSIBLE CAUSE
WHAT TO DO
The LED standby indicator does
not light up
Disconnected power supply
cable.
Burnt fuse.
Check the power supply cable.
Check the fuse.
A signal cannot be found
The antenna is disconnected.
The antenna is damaged /
badly aligned.
Check the antenna cable.
Check the antenna.
There is no image or sound
SCART/TV/HDMI has not been
selected on your television.
Select the corresponding input
on your TV.
Coded channel messages
The channel is coded.
Select another channel
The remote control does not
work
The receiver is off.
It is not being properly pointed
at the system.
Obstructed front panel.
The batteries have run out.
Plug in and connect the
receiver.
Check for obstructions.
Replace the batteries.
The channel lock password has
been forgotten
-
Re-tune the channels to cancel
the lock.
After moving the receiver to
another room, it does not pick
up the digital signal
The antenna signal in the new
location may not be enough.
Supply the receiver with a
suitable signal level.
- 14 -
EN
