Parental control
This allows menus and channels to be protected.
1.- In the “System” menu select “Parental Control” and press the OK button. You will be asked to enter a
password (by default the password is “0000”).
2.- Once the password has been entered with the number buttons, the parental control can be activated or
deactivated.
Setting a password
If you wish to set a new password, go to the System menu > Set password. The current password must be
entered and then the new password.
Factory settings
This allows factory settings to be reset, deleting all the channels.
1.- In the “System” menu, select “Reset factory settings” and press the OK button to access the menu.
2.- You will be asked to enter a password (by default the password is “0000”).
3.- A confirmation window will be displayed. Select “YES” restore the default settings deleting all the existing
channels or “NO” to cancel.
4.- Press the EXIT button to exit.
Information
Displays information about the receiver and the software.
1.- In the “System” menu, select “Information” and press the OK button to access the menu.
2.- Press the EXIT button to exit.
Upgrading Software
This allows software to be upgraded via USB.
1.- In the “System” menu, select “Upgrade software” option and press the OK button to access the menu.
The software upgrading menu will be displayed.
2.- Once the option has been chosen, press “Start” to begin upgrading.
3.- Press the EXIT button to exit.
- 11 -
EN
