EN
- 4 -
DESCRIPTION
- Wireless remote control extension system in 433 MHz.
- Maximum transmission distance 75 m without obstacles.
- Quick and easy installation.
CONTROLS AND FUNCTIONS
TRANSMITTER
RECEIVER
1.-
LED power indicator. Flashes in red during transmission.
2.-
Infrared transmitter/receiver window for remote control signal.
3.-
9 V DC
: power supply input for the mains adapter provided.
4.-
ANT
: antenna cable.
5.-
IR
: output signal connector for cable with infrared transmitters.
CONNECTION AND OPERATING
- Connect the mains adapters to the transmitter and receiver and plug them in to the power supply.
- Point the remote control towards the transmitter window (TX) where the infrared receiver is located.
- The receiver (RX) must be facing the device you wish to control with the remote control.There are two
options:
1.- Point the receiver window, where the infrared transmitter is located, towards the infrared transmitter
of the device to be controlled.
2.- Position the cable with infrared transmitters in front of the infrared sensor of the device to be controlled.
- The LED transmitter (TX) and receiver (RX) indicators will flash while they are transmitting.
VS-430_MANUAL_(EN)_20151022_Maquetación 1 05/11/2015 12:37 Página 4
