EN
- 4 -
DESCRIPTION
- 100 V line professional P. A. amplifier with phantom power supply, priority and selector for 6 auxiliary
inputs.
- Power: 90 W maximum, 60 W RMS.
- 100 V line output and 8Ω low impedance.
CONTROLS AND FUNCTIONS
FRONT PANEL
1.-
Output selectors AUX 1-6:
to choose the output signal from the 6 auxiliary inputs.
2.-
MASTER:
master output volume control.
3.-
OUTPUT:
output signal level LED indicators. They regulate the individual input volume controls or
the MASTER output volume control so that the level does not exceed the green LED indicators. The
red LED indicators indicate saturation or a distorted signal which can lead to damaging the speakers
or the amplifier.
4.-
POWER:
amplifier ON/OFF switch.
BACK PANEL
1.-
AC current socket:
to connect the AC power supply cable.
2.-
Earth terminal:
earth screw. To be used if the electrical supply does not have one incorporated.
3.-
GND/LIFT:
switch which is used to disconnect the earth from the mass. If you can hear buzzing in
your system due to the earth or a link to other equipment, move the switch to the LIFT position.
4.-
AMP IN/PRE OUT:
the bridge connection between the 2 RCA connectors communicates the output
signal from the PRE OUT with the input from the AMP IN.
5.-
OUTPUT:
auxiliary stereo output, 2 X RCA 4 700 Ω 1 V.
6.-
Auxiliary input volume:
volume control for each one of the auxiliary inputs.
7.-
AUX 1-6
: stereo auxiliary inputs, 2 x RCA 47 000 Ω 1 V.
8.-
BASS:
bass tone control.
9.-
TREBLE:
treble tone control.
10.-
Mic. Volume:
volume control for the mic. input.
