EN
- 5 -
CONTROL FROM PC
On the DEVICE SCAN PAGE tab, press the START SCAN button to display the connected devices and
perform the following operations:
1.- Change the network settings of a transmitter/receiver. Click on the TX_SETUP (transmitters) or
RX_SETUP (receivers) button, select the device in the drop-down menu and edit the fields. If you
want to configure them manually you must deselect the DHCP field (ON) which enables the router to
automatically assign the IP address and network settings of the selected device.
2.- Modify the TX CHANNEL on the transmitter and receiver. Click on the number you want to change, in
the TX ID column on the transmitter or TX CONNECTED on the receiver and modify it. Finally, click on
the UPDATE button to apply the changes.
3.- Change the name of the transmitter/receiver for easy identification. Double click on the device name,
from the NAME columns, and edit the field.
4.- Set PRESET presets. Click on the SELET MODE drop-down and choose the preset you have previously
configured.
To create a preset:
1.- Go to the PRE EDIT MODE tab.
2.- Make changes to the displayed configuration and press “SAVE MODE”.
3.- Assign a name to the PRESET and press “OK” to save.
To delete a preset:
1.- Go to the PRE EDIT MODE tab.
2.- Select the PRESET from the SELECT MODE drop-down menu.
3.- Click on the DEL MODE button.
