FONESTAR FO-455M Instruction Manual Download Page 9

Click on Apply to save the changes. Take a note of this new IP address. From this moment onwards the
IP address assigned to this device must be entered in order to make any adjustments in your IP or MAC
address.

Step 3

: return to the network configuration your computer had.

TECHNICAL SPECIFICATIONS

FO-455M

CHARACTERISTICS

HDMI extension matrix through TCP/IP ethernet (transmitter and
receiver).
Transmission distance up to 120 m for a 1080p resolution.
Connection through ethernet with switch with IGMP Snooping
function or direct connection with cable cat 5e/6.
According to IEEE-568B standard.
Allows up to 16 transmission channels and 237 receivers.
Ethernet bandwidth 70 Mbps.
Video compression format M-JPEG.
Remote control for channel selection.

TRANSMITTER

Input: 1 female HDMI
Output: 1 RJ-45 ethernet HDMI extension through cable Cat 5e/6
Controls: channel selection

RECEIVER

Input: 1 RJ-45 ethernet HDMI extension through cable Cat 5e/6
Output: 1 female HDMI
Controls: channel selection

POWER SUPPLY

Transmitter and receiver: 5 V DC, 1 A with adapter included

DIMENSIONS

Transmitter and receiver: 130 x 24 x 85 mm depth

ACCESSORIES

Remote controlled cable extender

- 9 -

EN

160311_FO-455M_FO-456MR_MANUAL_(EN)_Maquetación 1  14/3/16  8:31  Página 9

Summary of Contents for FO-455M













Reviews: