- Finally, position the rest of the loudspeakers one by one, first fixing the front part and then the rear. In the
case of the rear anchor between the mid-treble loudspeakers, the connecting system is the same as that
previously described except that it has the possibility of using different angles (0º, 2º, 4º, 6º or 8º). This is
possible thanks to the holes the anchorage parts have, as can be seen in the following image.
2) ON THE GROUND
It is also possible to install the line array on the ground with the subwoofer as the base and the mid-treble
loudspeakers on top. This is the simplest and most suitable way of positioning it if there is no possibility of
hanging.
In order to connect the subwoofer and the loudspeakers to each other, the same procedure described earlier
must be followed. The tilt of the loudspeakers can also be adjusted in order to vary the coverage angle
between 0º and 8º in steps of 2º.
- 8 -
EN
