Pairing with a second or third Zone Expansion on the same Gateway
WARNING: To add a second and/or third Spot Thermostat you must have a
Wi-Fi router and an Internet connection. Up to three Spot thermostats can be
paired to each Spot Gateway, so if you have purchased a “Spot Expansion”,
follow the instructions below to pair your thermostats with the Gateway.
Make sure you have switched on the Gateway for at least 5 minutes
Step 1
Step 2
Press and hold the
Rst
button until you see the
BLE
LED switching from 5 fast blinks per se-
cond to one blink per second.
Click on the
Rst
button, the
Cloud
LED will blink
once per second, it is possible to pair a WiFi
relay paired to Spot 1 (see next chapter
Spot
WiFi Relay Pairing
).
Step 3
Step 4
Press the
Rst
button again, the
BLE
LED will
blink fast twice every second; you are ready to
pair the second Spot thermostat, follow steps 3
and 4 defined in the previous chapter
Modify the
Gateway Wi-Fi network
.
Press the
Rst
button again, the
Cloud
LED will
blink fast twice every second; you are ready to
pair the second WiFi relay (see next chapter
Spot WiFi Relay Pairing
).
Summary of Contents for SPOT SMART THERMOSTAT
Page 7: ...How to select and set the time How to select and set the temperature...
Page 35: ......
Page 38: ......
