59
Instructions for the installer
3.13 TSP parameters
The boiler operation is controlled by several parameters.
To change the parameters, press
and
at the same time for 3 seconds.
Scroll through the parameters by pressing
CH +/-
buttons.
Set onto the required one and press
.
The
symbol turns on to indicate that you can edit the parameter value.
The parameter value can be edited using
CH +/-
buttons.
To conirm modiication press
.
To quit the parameter editing mode press
.
Parameter
Settable values
Default values
Notes
P0 - TSP0
Boiler power selection
0 ÷ 7
According to the
model
0 = 12 kW natural gas; 1 = 24 kW natural gas;
2 = 28 kW natural gas; 3 = 24 kW propane; 4
= 28 kW propane; 5 = 12 kW propane; 6 = 32
kW natural gas; 7 = 32 kW propane.
P4 - TSP4
Fan speed at burner maximum output
TSP5 ÷ 250 Hz
According to the
model
12 kW natural gas = 187; 24 kW natural
gas = 199; 28 kW natural gas = 201; 24 kW
propane = 194; 28 kW propane = 198; 12 kW
propane = 185; 32 kW natural gas = 210; 32
kW propane = 205.
P5 - TSP5
Fan speed at burner minimum output
25 - 120 Hz
According to the
model
12 kW = 39; 24 kW = 42; 28 kW = 40; 32 kW
= 43
P6 - TSP6
Fan speed at ignition power
25 - 160 Hz
According to the
model
12 kW = 48; 24 kW = 58; 28 kW = 60; 32 kW
= 76
P7 - TSP7
Fan speed at heating maximum output
10 ÷ 100%
According to the
model
12 kW natural gas = 75; 12 kW propane = 74;
24 and 32 kW = 88; 28 kW = 87.
P8 - TSP8
Negative ramp start minimum speed
P5 ÷ P6
According to the
model
12 and 24 kW = 56; 28 and 32 kW = 60
P9 - TSP9
Negative ramp time
0 ÷ 30
(1 = 10 sec.)
According to the
model
12, 24 and 32 kW = 18; 28 kW = 25
P10 - TSP10
Heating output curves
0 ÷ 3
1.5
Resolution 0.05
P11 - TSP11
Heating thermostat timing
0 ÷ 10 min.
4
-
P12 - TSP12
CH power rising ramp timer
0 ÷ 10 min.
1
-
P13 - TSP13
Timer for CH post-circulation, freeze
protection and lue cleaning function,
conigurable
30 ÷ 180 sec.
30
-
P14 - TSP14
Setting of "solar" DHW thermostats
0 ÷ 1
0
0 = normal; 1 = solar
P15 - TSP15
Water hammer protection delay,
conigurable
0 ÷ 10 sec.
0
-
Tab. 17 List of parameters - I
