6
Rapid operating instructions
The following instructions will help you to switch the boiler on quickly and regulate it for immediate use.
WARNING
It is presumed that the boiler has been installed by a qualified installer, it has been commissioned and is ready to operate
correctly.
If any accessories have been fitted on the boiler, these instructions will not cover them. You will therefore have to refer to
the full boiler instructions as well as to the specific instructions for the accessories.
This manual contains full details of how the boiler works, and full operating and safety instructions.
1. Open the gas cock installed ahead of the boiler.
2. Turn the master switch installed ahead of the boiler ON; the boiler display turns on.
3. If you do not wish to activate the CH function, press the
button until displaying the symbol
:
only the DHW function will be enabled.
4. If you wish to activate both the heating and DHW functions, press the
button until displaying the
symbol
.
5. If you do not wish to activate the DHW function, press the
button until displaying the symbol
:
only the CH function will be enabled.
6. To set the domestic hot water temperature, press DHW +/- buttons.
7. To set the heating water temperature, press CH +/- buttons.
8. Set the desired temperature on the (optional) ambient thermostat in the building. The boiler is now ready
to operate.
If the boiler shuts down, press button
If boiler does not resume its operation after three attempts, contact a qualified Service Centre.