4
RAPID OPERATING INSTRUCTIONS
The following instructions will help you to switch the boiler on quickly and regulate it for immediate use.
*UJTQSFTVNFEUIBUUIFCPJMFSIBTCFFOJOTUBMMFECZBRVBMJöFEJOTUBMMFSJUIBTCFFODPNNJTTJPOFEBOEJTSFBEZUPPQFSBUF
DPSSFDUMZ
*GBOZBDDFTTPSJFTIBWFCFFOöUUFEPOUIFCPJMFSUIFTFJOTUSVDUJPOTXJMMOPUDPWFSUIFN:PVXJMMUIFSFGPSFIBWFUPSFGFSUPUIFGVMM
CPJMFSJOTUSVDUJPOTBTXFMMBTUPUIFTQFDJöDJOTUSVDUJPOTGPSUIFBDDFTTPSJFT
This manual contains full details of how the boiler works, and full operating and safety instructions.
Open the gas cock installed ahead of the boiler.
Turn the master switch installed ahead of the boiler ON: the boiler display (fig. 1) turns on.
If you do not wish to activate the heating function, press the “operating mode selection” button until symbol
is displayed: only the DHW function will be enabled.
If you wish to activate both the heating and DHW functions, press the “operating mode selection” button until
symbol is displayed .
If you do not wish to activate the DHW function, press the “operating mode selection” button a few times
until symbol is displayed: this will activate the CH function only.
To set the DHW water temperature press DHW +/- buttons (
A,
fig. 1). Set temperature as required.
To set the heating water temperature, press heating water +/- buttons (
B,
fig. 1). Set temperature as required.
8
. Set the desired temperature on the (optional) ambient thermostat in the building.
The boiler is now ready to operate.
If the boiler shuts down, press “reset” button (
C,
fig. 1).
If boiler does not resume its normal operation after 3 attempts, contact a qualified Service Centre.
Summary of Contents for FORMENTERA CTFS 32
Page 60: ...60 C D E fig 40 ...
Page 67: ...67 ...
