Service Manual
båÖäáëÜ
cê~å´~áë
47
Mounting the back panel
1. Reinsert the ground cable and reestablish the link to the button
connection.
2. NOTICE! Do not jam in the ground cable or button connection.
Carefully place the rear panel back on.
3. Fasten the back panel securely with 6 screws.
4.9
Replacing the lower cover of the control panel
Removing the lower cover
✔
The unit is switched off and the power cable is disconnected.
1. Remove the 6 screws from the underside of the control panel.
2. Remove the lower cover.
Summary of Contents for MyCrown Design
