Service Manual
båÖäáëÜ
cê~å´~áë
37
3. Pull off the 2 connectors from the hard disk.
4. Unscrew the hard disk (4 screws).
4.5.3
Installing the hard disk
1. Screw the new hard drive onto the sheet metal part using the 4
screws.
2. Attach the 2 connectors to the new hard drive.
3. NOTICE! Do not jam in the connectors. As shown, lay the cables as
a loop and insert the hard drive.
4. Screw the sheet metal part tight with 4 screws.
Summary of Contents for MyCrown Design
