4
console paired previously; if the back connection is not successful within 8 seconds, it will enter into the auto sleep status.
③
在主机和手柄休眠时，按
HOME
键可唤醒主机，如果没有唤醒成功，可再次按下
HOME
按键唤醒主机和
手柄。
③
Press the HOME key to wake up the console when the console and controller are in dormant state; if not successful,
you can press the HOME key again to wake up the console and controller.
6
、
NFC
功能：
6 NFC Function:
6.1
、因
NFC
感应区在右手柄
3D
处，读卡时需将
NFC
卡贴在右手柄
3D
帽正上方，读取时间
5-8
秒。
6.1 As the NFC induction zone is at the right controller 3D, you should make the NFC card cling right
above to the right controller 3D cap, and the read time is 5-8s.
7
、充电指示与充电特性：
7. Charging Indication and Charging Characteristics:
手柄充电时：充电
LED
指示灯亮起
,
充满电后
LED
灯灭灯。
When the controller is charging: the charging LED lamp lights up, and the LED light turns off when it is
fully charged.
8
、自动休眠：
8 Automatic Sleep:
8.1
、连接
Switch
模式：
8.1 Connection Mode to Switch:
Switch
主机屏幕关闭或关机
,
手柄自动断开连接进入休眠。
Turn off or power off the screen of the Switch host to make the controller automatically disconnect and
sleep.
8.2
、蓝牙连接模式：
8.2 Bluetooth Connection Mode:
短按蓝牙对码键后蓝牙断开连接进入休眠。
The bluetooth is disconnected and enters sleep mode after the bluetooth code key is pressed shortly.
8.3
、
5
分钟之内手柄没有任何按键按下则自动进入休眠
(
包括重力感应不动
)
。
8.3 If any key of the controller is not pressed within 5 minutes, it will automatically go to sleep
(including the gravity sensor does not move).
9
、电池低电量报警：
