5
Replacement and maintenance
Be sure not to let any dust or other stains on the flash tube
and modeling lamp.
Wipe off any dust or foreign matter on the tube/lamp with a soft cloth.
It may shorten the lifespan and deteriorate the color temperature.
A. How to replace a modeling lamp.
Screw type (Base : E-11)
B. How to replace a fuse.
Turn OFF the power and unplug the power cord from the AC socket.
Turn it counterclockwise and remove the modeling lamp.
Turn the new modeling lamp clockwise to install.
(Please make sure your hands are dry.)
Be careful not to allow any fingerprints, dust or stains on the lamp.
When a foreign substance is present clean with a soft cloth.
Turn OFF the power and unplug the power cord from the AC socket.
Use a (-) screwdriver and open the fuse box to pull out the fuse.
Check if the fuse is blown and replace it with the spare
fuse placed inside the fuse box.
C. Maintenance
1.
2.
3.
4.
Pin type (Base : GX-6.35)
Allow the modeling lamp to cool down enough.
Turn it counterclockwise and remove it.
While assembling, turn it clockwise and then reassemble it.
Be careful not to allow any fingerprints, dust or stains on the lamp.
Clean it with a soft cloth applied with alcohol after replacement.
1.
2.
3.
4.
1.
2.
3.
Summary of Contents for Dp Series
Page 1: ...E Dp HDpSeries Manual ...
