Thank you for purchasing FOMEI’products.
Please read this user manual carefully before using this product.
E-mail: [email protected]
Warning before use:
1.
Make sure that the product is intact and that there are no missing parts.
2.
In case of damage, contact a professional service FOMEI.
3.
Keep the environment dry and ventilated when using the product.
4.
Keep the product clean by clean.
5.
Do not scratch or apply pressure to the product.
Safety warning:
1.
Keep this product out of reach the rain or humidity to avoid damage or injury.
2.
Do not disassemble the product. In case of damage contact a service FOMEI or contractual
service with trained professionals.
3.
If the product is disassembled, you will not be covered under warranty.
4.
Do not use the product in extreme temperatures (+ 50
°
C).
5.
The product is not suitable for children.
6.
Using a flash continuously (succession of 250 flashes) the battery might be overheated.
7.
Firing 150 flashes successively at full power and an ambient temperature of 25
°
C may cause
overheating alarm to beep. After 5 seconds of beeping, firing of additional 50 flashes is
possible. Depending on the battery status (below 70% of use, temperature) firing up to 250
flashes may be possible without overheating.
8.
An overheated battery may cause damage. To avoid overheating, leave flash unused for 10
minutes or more after a succession of 250 flashes at full power.
