33
e02_dv50_7e.fm
Before Using the Ha
ndset
J
Move the pointer
In the Custom menu or while i-mode or Full Browser is connected, move the pointer (
L
,
M
,
K
,
etc.) up/down, left/right or diagonally to select an item.
In some Custom menus, the pointer shape varies or the pointer is not supported.
Move the pointer to the edge of the screen while i-mode or Full Browser is connected to show
G
,
R
/
\
,
Z
and scroll the screen to the direction of the arrow. If Link is set,
M
appears and double-tap to move to the
linked page.
The pointer moving speed varies depending on the finger sliding speed.
J
Move the cursor
In the Basic menu or Submenu, move the cursor up/down and left/right instead of using four-way key.
When there are multiple pages, move the cursor to switch the pages.
J
Determining
After moving the pointer or cursor, double-tap the item pointed with the pointer or cursor to set it
instead of using the OK key.
Custom menu
screen
Basic menu
screen
When using the TOUCH CRUISER pad
Avoid using the TOUCH CRUISER pad continuously for more than 30 minutes. Take regular breaks to
rest your eyes and do a stretching exercise to relax your finger, hand, wrist, forearm and shoulders.
Do not operate it with unnecessary force or in an improper posture. May hurt your finger and wrist.
This product is designed to be operated with one finger. In the following cases, the TOUOCH CRUISER
pad is not activated.
When operated with a gloved finger
When operated with a pen, ballpoint pen, pencil, etc.
When operated with two or more fingers
When operated with foreign objects placed on the operation pad
When operated with a fingernail
The TOUCH CRUISER pad may not be properly operated when there are droplets or condensation on
the operation pad or when the operation pad is operated with a wet finger or a moist finger with sweat.
The following usages may cause a malfunction.
Do not drop or bang the FOMA terminal, or do not subject to strong force or impacts.
Do not spill a liquid such as coffee and juice on the FOMA terminal.
Do not attempt to disassemble.
Keep the surface sheet clean with a dry cloth. When the surface sheet gets too dirty, wipe it with a wet
cloth and fully dry before using it.
Note that putting a sticker, etc. to the operating range may cause a malfunction.
dv50_e.book 33 ページ ２００７年９月７日 金曜日 午前８時４７分
