6
110CT/CR/FB Ice and Water Dispensers
Fig. 1 – Rear connections, freestanding models
3/8" FPT condenser outlet location
(water-cooled only)
3/4" MPT ice machine drain location
access panel
3/8" FPT
water inlet
3/4" MPT drain
power cord
NEMA 5-15
3/8" FPT condenser outlet location
(water-cooled only)
2.75
" (6.8 cm)
3.75
" (9.3 cm)
4.5
" (11.4 cm)
4.75
" (11.9 cm)
12.25
" (31.2 cm)
33.75" (85.8 cm)
31.5" (80 cm)
14" (35.7 cm)
12.38" (31.4 cm)
9.62" (24.4 cm)
10. Remove top front cover by removing two screws at bottom corners of cover. Lift cover slightly and pull
forward.
11. If dispenser is equipped with SensorSAFE remove protective plastic coating from dispense sensor
labels.
12. Turn on dispenser power and bin signal rocker switches. Check dispenser and ice machine operation.
13. Sanitize ice machine according to instructions in ice machine manual. Discard ice made during
sanitizing process.
14. Turn off ice machine bin signal switch.
15. Remove dispenser hopper lid; sanitize dispenser according to instructions beginning on page 12.
16. Turn ice machine bin signal switch on and replace front covers, securing with screws.
