4
Symphony Series Pressurized Water Sanitizing Kit - Single Filter
9. Turn ON water supply.
10. Plug in dispenser.
11. Dispense 3 cups (24 oz) of water into a
container
(Fig. 5). Sanitizer will fill the
dispenser water lines.
Note: Maximum length of water line between
dispenser and filter system must not exceed
30 ft. (9 m).
12. Discard water collected in container.
Fig. 5
3 cups
13. Remove any panels required to gain access
to water reservoir, evaporator drain tube, and
compressor switch.
Note: Consult the Operation and Service manual
shipped with your unit.
14. Locate the Compressor Switch and put in the
OFF position.
15. Drain 2 cups (16 oz) of water from the water
reservoir by releasing evaporator drain
tube
(Fig. 6.1) from float reservoir bracket
(Fig. 6.2), removing plug (Fig. 6.3) from drain
tube and releasing (unclamping) pinch clamp
(Fig. 6.4) (if equipped).
16. Plug drain hose, replace drain tube in
reservoir bracket.
Fig. 6
1
2
3
4
12CI Shown
