7
Bag pin installation
1. Position plastic bag pin nuts onto the rear slots of the bag stand
(Fig. 2).
2. Thread in and tighten bag pins.
Fig. 3
Fig. 2
Fig. 4
Foot pedal accessory
The optional foot pedal accessory allows dispensing of ice while
keeping your hands free. The pedal is placed on floor near bag
stand in front of the dispenser. It plugs into the 3-pin connector
located just under the control panel behind the blower motor
(Fig. 3).
Bag installation
Note: Bag pins are designed to be used with bags mounted on wire
wickets. Do not install more than one wicket of bags at a time.
1. Move chute lever to up position (Fig. 4).
