12
self-contained
VISION • RIDE Technology
Connect louvered docking assembly to ice machine.
7
Internal connections
Air-cooled ice machines – follow steps 7.1 through 7.5.
CAUTION
• Plug must be accessible after final installation.
• H_E1410A/W 230/50/1) requires a 20 amp circuit (4.00 mm
2
wire)
• Remove twist tie
• Carefully pass cord thru opening and plug
into wall outlet
• For H_E units, install a suitable plug
Power cord
7.3
➊
➋
• Slide ice machine into louvered docking
assembly
ensuring that drain tube is fully
seated on barbed drain fitting
➊
• Insert ice transport tube all the way into
coupling and tighten nut firmly
➋
Ice transport tube
7.1
➊
• Insert potable water line into valve
➊
Potable water and drain lines
7.2
• Position plate into opening and secure
with supplied screw
Power cord
7.4
