Installing Shelves - FZR2 only
1. Remove shelves and shelf brackets packed inside freezer. (If
ordered, find additional shelf accessory in separate box.)
2. Install shelf brackets in pilasters (insert top tab, squeeze and
push in lower tab)
(Fig. 1).
Fig. 1
Installing Glycerine Solution in Product Simulation Bottle -
Required
1. Remove the bottle from the bracket located in the upper right
corner of the freezer
(Fig. 2).
2. Remove the top and fill the bottle with a 60/40 solution of
glycerine and water.
3. Replace the top (and probe).
4. Reinsert bottle into the bracket.
Note: If you are using this in a food service application, and installing
in accordance with NSF, you must remove the probe from the
bottle. NSF requires that air temperature be displayed.
Fig. 2
5. Plug in the freezer and return the power switch to ON (Fig. 3).
Fig. 3
FZR1/FZR2 Compact Freezers 5
