17
.INSTALLATION OF ZERO FRAME
Fix the frame on the wall with the appropriated screws (screws are not given by
us).
Use 24V power supplies
Use power supplies with the correct Wattage with regards to what indicated on the
label positioned on the back of each FOLIO® LED panel.
Pay particular attention to the data on the label before connection the appliance to the
mains.
IN CASE OF MALFUNCTION, DISCONNECT THE APPLIANCE.
Use class II drivers with adequate absorption with regards to the consumption of the
FOLIO® panel, with an exit current of 24V and with SELV exits EN 61347-2-13 compliant.
It is recommended to connect maximum 4/5 FOLIO® panels to one driver.
.POWER SUPPLIES
FOLIO
®
SINGLE PANEL
FOLIO
®
TWO OR MORE PANELS
FOLIO
®
24V
Panel
FOLIO
® Panel
FOLIO
® Panel
220V
220V
Ceiling fixing follows the same procedure.
24V
POWER SUPPLY
Summary of Contents for ZERO40
Page 12: ...14 FOLIO PANEL FIXING Proceed with the installation of the remaining panel s in the same way...
Page 13: ...15 CLOTH POSITIONING Position the fabric with the eventual print to the outside...
Page 14: ...16 CLOTH POSITIONING Insert the seal in all four sides of ZERO frame and tense the fabric...
