.CLEANING
General indications for proper care of
FOLIO
®
products
:
•
To enable an efficent performance of
FOLIO
®
panel we recommended regular
cleaning.
•
The parts influencing the performance of the light (such as white acrylic sheets,
marbles or glass) should be cleaned following the instructions below.
•
The cleaning of EXTERNAL parts and SURFACES which are part of the
FOLIO
®
panel can be executed in according to the following table:
COMPONENTS
TOOLS
CLEANING SPECIFICATIONS
Aluminium or iron
parts
Glass, marble, onyx
spotlight
Transparent plastic
spotlight
Opal plastic spotlight
Damp, soft, non-abra-
sive cloth and dry, soft
non-abrasive cloth
Slightly damp, soft,
non-abrasive cloth
Dry, soft non-abrasive
cloth
Slightly damp, soft,
non-abrasive cloth
Dampen a soft cloth using warm water with
little chlorine-free liquid soap and clean the
product a second time using a clean dry soft
cloth
Avoid possible static before cleaning. While
cleaning apply light pressure to the parts.
NOTICE : use cleaning agents suitable for glas,
marble or onyx
Avoid possible static before cleaning. While
cleaning apply light pressure to the parts.
NOTICE : do not use any type of cleaning
agents, neither liquid nor solid
Avoid possible static before cleaning. While
cleaning apply light pressure to the parts.
NOTICE : use only diluted alcohol-free clean-
ing agents suitable for plastic
NOTICE
: DO NOT SPRAY OR POUR DIRECTLY ON THE PANEL ANY TYPE OF
CLEANING AGENT BUT DISTRIBUTE THE CLEANING AGENTS (LIQUID OR SOLID)
ON A SOFT AND NON-ABRASIVE CLOTH. IT IS POSSIBLE TO CLEAN THE PANEL
BY USING JUST A DRY, SOFT AND NON-ABRASIVE CLOTH.
SAFETY NOTICE
Should any doubt concerning the cleaning of the
FOLIO
® panel arise, please
contact us by email at the following address:
•
Before cleaning, the lighting fixture must be switched off.
•
All the electrical connections must be disconnected.
12
