background image

PRODUCT SAFETY

It is your responsibility to use your trailer as instructed and only as instructed for your 
own safety and safety of others. Should you determine that the instructions are not fit 
for purpose or there is an error, please contact our customer support team immediately. 
Please do not create your own unsanctioned operating instructions.  

Should you not wish to accept these risks or do not wish to follow the safety instructions 
and have not used your Foldy trailer yet, please contact our customer services team to 
arrange a product return and refund. Collection, rework, repackaging and restocking fees 
may be applied.

WAIVER OF PERSONAL HAZARD CLAIMS

Foldy Trailer 750 Series - User Manual V1.0

04

(in the Event of Negligent and Unsanctioned Use).

It  is  of  utmost  importance  you  read  this  user  manual  carefully  and  thoroughly  in  order  to 
familiarize yourself with the correct and safe operation of the Foldy trailer. Serious injury and 
harm can result from improper, negligent or unsanctioned use through self-developed operating 
procedures.

By accepting ownership of this trailer, or benefiting from its utility, you acknowledge to have 
read and considered the safety warnings made in this user manual and will follow the operating 
instructions  provided  correctly.  You  also  acknowledge  that  you  will  not  participate  in  the 
improper, negligent, irresponsible or reckless, or unsanctioned use of the Foldy trailer and will 
not participate in using self-developed operating procedures (whether partially derived from this 
user manual or not).

It is your responsibility to inform each person involved in the Foldy trailers operation to engage 
only in those activities as described by this user manual. You are also responsible to ensure that 
each person involved has the prerequisite skills, personal strength and tools required to engage 
in those activities, as described by this user manual, in a safe manner.

It is your responsibility to inform any person involved in the use of the Foldy trailer (whether 
through a rental agreement or not) about the importance of reading this user manual for the 
safe operation of the Foldy trailer and this disclaimer of liability and that their rights to claim 
in  the  event  of  improper,  negligent,  irresponsible  or  reckless,  or  unsanctioned  use  has  been 
automatically waived prior to them using the Foldy trailer.

It is your responsibility to inform any would be buyer of the Foldy trailer about the importance 
of  reading  this  user  manual  for  the  safe  operation  of  the  Foldy  trailer  and  of  this  disclaimer 
of  liability  in  the  event  of  improper,  negligent,  irresponsible  or  reckless,  or  unsanctioned  use 
and that their right to claim against such event has been automatically waived prior to them 
purchasing the Foldy trailer from you.

Summary of Contents for 750 Series













































Reviews: