180g/ml
37.5g/ml
37.5ml-45ml
22.5g/ml
2.5ml-30ml
120g
5-5.5Quarts
/mll
1.
that all the accessories are included. Please contact the service
2.
You must confirm that the voltage indicated on the popcorn maker
corresponds with the voltage in your home.
3.
Please ensure the machine is level and on a stable/heat-resistant
table or platform to avoid malfunction.
Note: When the machine is working, The popcorn maker base
will emit heat. Make sure your table or platform can withstand
the heat or use other things to protect your table or platform.
4.
Gently press the lid handles at both with your hands to make sure
that each side of the popping plate is completely fixed to the popcorn
maker base.
NOTE: Make sure the popping plate is correctly installed on the
popcorn maker base. If it is installed incorrectly, the machine
will not work.
TIPS: You can try to rotate the center knob so that the popping
plate is installed correctly.
5.
The popcorn maker is now ready for use.
NOTE: When you use the popcorn maker for the first time, it may
emit a slight smoke or smell. This is normal and should disap-
pear after 1 or 2 uses. You can rest assured that this will not
affect the quality of the machine.
6.
Various quantities of popcorn can be made with this popcorn maker.
Refer to the chart below and determine what volume of popcorn you
want.
CAUTION: Do not use more than the maximum recommended
amounts of corn and oil. Not strictly following the manufactur-
er's recommendations may damage the popcorn maker or cause
other dangers.
USING POPCORN MAKER
1.
Align the popping plate of the
popcorn machine with the base, then
install the two accessories well.
2.
Add the approximate (recommend
30ml) amount of vegetable oil or butter
to the popping plate, And evenly
distribute 120 grams of corn kernels to
the popping plate.
IMPORTANT: Do not exceed 180
grams of corn kernels in a single
run.
To use your popcorn maker
Before first use
Volume of Popcorn Popping Corn Oil Dosage Butter Dosage(Optional)
4.5-5Quarts
06
07
