13
Disassemble tubing connector
Certain models use “press to insert” quick connect fittings
(tube-to-tube couplings, tube-to-thread adapters or tube-to-bulk-
head adapters). To make the connection, push the stem into the
receptacle and seat firmly.
There are two styles of connector. One has a release tab. To
open this style, press release tab and pull fitting apart.
The other style uses a locking collet with spring clips inside
the receptacle to secure the connector.
To open this style connector, release the locking collet by
pushing it towards the housing with your thumbnail or a small
screwdriver blade. Holding the collet ring in, withdraw the stem
portion, twisting slightly if necessary.
Tube Barb
Coupling
To assemble fitting,
push together firmly.
Depress collet with thumbnails
or screwdriver blade
Collet
