a
Step 2
.
Setting up the line
•
Wrap tree protectors around desired tree trunks at pre-calculated line height. Use of a step ladder
may be necessary. Exercise caution and follow necessary safety guidelines.
•
Wrap anchor line around tree by threading through loops on tree protector, then thread ratchet
through the loop at end of anchor line. Pull ratchet until line is snug around tree with no slipping.
•
Take course line and wrap around other tree by threading loop end of line through loops on tree
protector. Pull loose end through the loop at end of the line and snug by hand to prevent slipping.
•
Fold the line into a
“
V
”
as it is passes through loop to help the line stay flat. See image below.
•
Do not tighten the line until after webbing hooks and triangle carabiners are attached.
Ratchet Handle
Main Line
Anchor Line Loop
Release Lever
Main Line Loop
Anchor Line
Axle Slot
Line Threaded
Through Loops
In Tree Protector
Line Folded into a
“
V
”
